Laser cutting is one of the most accurate methods of cutting materials. It is easy, fast, and effective in cutting any type of material. In fact, laser cutting has many advantages compared to the traditional cutting tools. That is why you need to employ this method if you are involved in an industry that cuts wood, metal, concrete, glass, or plastic. This article provides information on the accuracy of laser cutting.
What Really Is Laser Cutting?
Laser cutting uses a highly concentrated stream of photons to cut various materials such as concrete, glass, plastic, metal, and wood. You can program the laser tool to carve delicate shapes, make basic cuts, and engrave a design on the surface of the material. Most of the time, a CAD or computer-aided design software is used to make the appropriate cut.
You can even automate the entire cutting job by pairing the tool with an automated feeder table and CAD software program. Laser cutters are much safer and easier to use compared to traditional cutting tools out there. When you use a laser cutter, you are quite sure that the cutting will be accurate and identical at all times. In fact, you don’t have to deal with dangerous blades when you use a laser cutter.
What Are The Advantages Of Laser Cutting?
There are many other advantages of laser cutting other than accuracy and precision. The tool will take a lot of work off your hands as well as make your life a lot easier in the process. You only need one machine to make simple cuts, intricate designs and engrave anything on the surface of the material. In fact, you will save energy in the process since there is only one machine to deal with. You won’t have many cutting machines sucking up your power.
A laser machine will use only 10kW of power whereas most of the other cutters will use in excess of 50kW of power. The laser machine won’t actually touch the material that it cuts. The material is cut with the heat generated by the machine. Hence, the materials won’t be damaged by the machine. That way the lifespan of the machine is also prolonged. You will have very little repairs and maintenance to perform over time.
A laser cutter doesn’t have spinning or dangerous blades where the worker could easily become injured. The laser beam is usually sealed behind a tight lightbox. Hence, the laser won’t cause any harm or injuries to the operator of the machine. That is why you need to make the shift to a laser machine without further delay.
The Accuracy Of A Laser Machine
Laser cutting is incredibly accurate compared to most of the other traditional cutting tools on the market. The finished product is clean and smooth due to the accuracy of the machine. You can easily make smaller cuts than other machines with a laser cutter. That way you will get more finished products from a single piece of material. You will create less waste in the cutting process. In fact, you can easily adjust the intensity and speed of the cutting process with a laser machine. That way you will get similar cutting results no matter what material you plan to cut. Laser machines are more precise and accurate compared to any other cutting machine on the market today.
Types Of Laser Cutters
There are three types of laser machines on the market today. Some cutters will only cut metal while some others will cut metal and plastic. On the other hand, there are machines that work almost on every type of material. That is why it is important that you invest in the right type of machine depending on what you plan to cut.
Gas Cutter – This machine uses a laser comprised of CO2. It has a higher wavelength compared to the other types of machines. A gas cutter is used to cut non-metal materials.
Crystal Cutter – This machine is made of neodymium-doped yttrium ortho-vanadata and neodymium-doped yttrium aluminum garnet. This cutter will work with more materials compared to the gas cutter. But it is very costly.
Fiber Laser Cutter – This is the best laser machine on the market. This machine can cut any type of material. It has the longest lifespan with 25,000 working hours.
The aforementioned article provides information on why you should invest in a laser cutting machine right now.